ARENA TopSL basic impregnation, for dedusting and protecting the surface from moisture

Download technical documentation PDF Areas of use

Price on request.

Description:
An aqueous solution based on synthetic acrylic resins with special polymer additives. After drying, it creates a completely transparent coating that is resistant to moisture and UV rays!

Purpose Benefits Specifications Material application technology Construction sites Manufacturer`s warranty

Purpose:

Appointment:

ARENA TopSL (basic) - Treatment (priming) of the surface of concrete, plaster, putty, etc. by forming a thin (up to 50-70 microns) film penetrating into the depth of the surface, which effectively protects the surface from dust and moisture absorption. After drying, it creates a completely transparent coating!

Benefits:

Advantages:

easy and fast application
removes dust from the surface
protects against moisture absorption
penetrates deeply and strengthens

Specifications:

TECHNICAL SPECIFICATION
NAMING OF THE INDICATOR	MEANING
Appearance, packaging	Translucent white liquid, canister 10 / 5 / 2,5 kg
Density	1,03 - 1,05 kg / l
Dry residue	15 - 20 %
Expenditure	0,1 - 0,15 kg / m²
The time of complete drying, at + 20 °С	24 hour's
Application temperature	+ 5 °С to + 35 °С
Protection	Short-term exposure to precipitation

* The technical characteristics shown in the table were obtained during laboratory tests at a temperature of 20 ± 2 ° C and a relative humidity of 60%.

Material application technology

Preparation of the foundation:

The surface of products and structures must be prepared by cleaning from obvious contaminants that may prevent the penetration of impregnation.

Preparation and application:

The impregnation is supplied in a ready-to-use form. It is applied to fresh concrete, or plaster layer, after setting, about 12 hours after laying. Work should be carried out at a temperature not lower than + 5 ° C. The penetrating impregnation ARENA TopSL, is applied evenly over the entire surface with a velour roller, brush, manual or electric spray in two layers.

Surface care:

The operation of the treated surface is recommended no earlier than 14 days after treatment. It is recommended to use regular wet cleaning to care for the coating.

Security:

Use rubber gloves, cotton gloves, respirator, safety glasses, thick cloth overalls, boots. In case of contact with skin or eyes, rinse immediately with water and seek medical advice.

Transportation:

Transportation should be carried out at a temperature not lower than 0 ° C. The material is transported by all types of transport in covered vehicles in accordance with the rules of cargo transportation applicable to this type of transport. The methods of transportation used should exclude the possibility of atmospheric precipitation entering them, as well as ensure the safety of packaging from mechanical damage and integrity violations.

Construction sites

Manufacturer`s warranty

Storage conditions and manufacturer's warranty:

Dry mixes should be stored packed, avoiding humidification and ensuring the safety of packaging, in covered dry storage rooms with a relative humidity of no more than 60%. The shelf life of products packed in bags is 12 months, from the date of manufacture indicated on the package.